Die - Designline - Hülle breite Tags
Product number:
CD-Di-780
Weight:
0.029 kg
Product information "Die - Designline - Hülle breite Tags"
Die - Designline - Hülle breite Tags
A great punch set to create beautiful envelopes
for the wide tags .
So you can easily hide and give away small surprises quite
.
The punches and finished envelopes have the following sizes
- Envelope 1 (approx. 12.0 x 7.0 cm) (approx. 5.2 x 7.0 cm)
- Envelope 2 (approx. 12,0 x 6,0 cm) (approx. 5,3 x 6,0 cm)
- Envelope 3 (approx. 12.0 x 8.0 cm) (approx. 5.3 x 7.0 cm)
The design for these punches comes from the dear Sandra Möller of Paper and Passion.
The punch works with standard punching and embossing machines (DieCut systems).
You can use it for cardboard, felt, fabric, shrink film.
Material: 100 % steel
On Pinterest and in our creative collection we have collected many great ideas for this punch.
Take a look and get inspired.
Published on: 28. October 2022
Ähnliche Artikel
Die - Designline - Breiter Anhänger mit Stern
€14.95*
"Die - Designline - Breiter Anhänger mit Stern"
A beautiful wide rectangular pendant with a small star in the lower right corner, make your gifts special.
Also in the set are one square and one round hole punch each.
The punches have the following sizes:
Width pendant (approx. 5.0 x 8.9 cm)
square hole punch (approx. 2.4 x 5.9 cm)
round hole punch (approx. 1.3 cm in diameter)
The design for these punches comes from dear Sandra Möller of Papier und Passion.
For a better punching result please separate the punches before use. You will find the link to a tutorial one paragraph below.
Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies. HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too.
The punch works with all common die cutting and embossing machines (DieCut systems).
You can use it for cardboard, felt, fabric, shrink wrap.
Material: 100 % steelMade in USA
We've collected lots of great ideas for this punch on Pinterest and in our creative collection .Take a look and get inspired.Published on: 17. June 2022
Die - Designline - Breiter Anhänger mit Herz
€14.95*
"Die - Designline - Breiter Anhänger mit Herz"
A beautiful wide rectangular pendant with a small heart in the lower right corner, make your gifts special.
Also in the set are one square and one round hole punch each.
The punches have the following sizes:
Width pendant (approx. 5.0 x 8.9 cm)
square hole punch (approx. 2.4 x 5.9 cm)
round hole punch (approx. 1.3 cm in diameter)
The design for these punches comes from dear Sandra Möller of Paper and Passion.
For a better punching result, please separate the punches before use. You will find the link to a tutorial one paragraph below.
Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies. HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too.
The punch works with all common die cutting and embossing machines (DieCut systems).
You can use it for cardboard, felt, fabric, shrink wrap.
Material: 100 % steelMade in USA
We've collected lots of great ideas for this punch on Pinterest and in our creative collection .Take a look and get inspired.
Published on: July 08, 2022
Die - Designline - Breiter schlichter Anhänger
€14.95*
"Die - Designline - Breiter schlichter Anhänger"
A beautiful wide plain pendant with plenty of space for dear greetings on your gifts.
In the set are still one square and one round hole punch and one rectangle.
The punches have the following sizes:
Pendant (approx. 5.0 x 9.0 cm)
square hole punch (approx. 2.5 x 5.0 cm)
round hole punch (approx. 1.3 cm diameter)
Rectangle (approx. 4.0 x 4.5 cm)
The design for these punches comes from dear Sandra Möller of Paper and Passion.
Unfortunately, a wrong inlay was added to the punch during production.For a better punching result, please separate the punches before use. You will find the link to a tutorial one paragraph below.
Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies. HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too.
The punch works with all common die cutting and embossing machines (DieCut systems).
You can use it for cardstock, felt, fabric, shrink wrap.
Made from 100% steel
We've collected lots of great ideas for this punch on Pinterest and in our creative collection .Take a look and get inspired.
Published on: 15. July 2022
Our recommendation for you
Die - Designline - Hülle schmale Tags
€19.95*
Die - Designline - Hülle schmale Tags
A great punch set to create beautiful envelopes for the long plain tag . So you can easily hide and give away small surprises quite .
The punches and finished envelopes have the following sizes
Envelope 1 (approx. 8.1 x 8.6 cm) (approx. 3.7 x 8.0 cm)
Envelope 2 (approx. 8.0 x 8.0 cm) (approx. 3.7 x 8.0 cm)
Envelope 3 (approx. 8.1 x 7.0 cm) (approx. 3.8 x 7.0 cm)
The design for these punches comes from dear Sandra Möller of Paper and Passion.
The punch works with the common punching and embossing machines (DieCut systems).
You can use it for cardboard, felt, fabric, shrink wrap.
Material: 100 % steel
On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired.
Published on: 28. October 2022
Cut & Emboss Folder - Mini Anhänger - Frühjahrsblüten - 11 x 15.5 cm
€12.95*
Cut & Emboss Folder - Mini Anhänger - Frühjahrsblüten - 11 x 15.5 cmCute little pendants with spring motifs. They fit perfectly on any gift packaging or as decoration on candles etc.Please put the folder CROSS into the punching and embossing machine and crankit through and it will be embossed and punched at the same time. The tags have the following sizeswide elongated tags (approx. 1.9 x 3.2 cm)round tags (approx. 2.8 x 3.3 cm)wide tags (approx. 2.5 x 2.7 cm)narrow elongated tags (approx. 1.0 x 5.5 cm)The folder works with standard die-cutting and embossing machines (DieCut systems),but only with the normal plate and not with the magnetic plate.For more inspiration, visit our design team.Published on: 17. May 2024
Die - Designline - Breiter schlichter Anhänger
€14.95*
"Die - Designline - Breiter schlichter Anhänger"
A beautiful wide plain pendant with plenty of space for dear greetings on your gifts.
In the set are still one square and one round hole punch and one rectangle.
The punches have the following sizes:
Pendant (approx. 5.0 x 9.0 cm)
square hole punch (approx. 2.5 x 5.0 cm)
round hole punch (approx. 1.3 cm diameter)
Rectangle (approx. 4.0 x 4.5 cm)
The design for these punches comes from dear Sandra Möller of Paper and Passion.
Unfortunately, a wrong inlay was added to the punch during production.For a better punching result, please separate the punches before use. You will find the link to a tutorial one paragraph below.
Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies. HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too.
The punch works with all common die cutting and embossing machines (DieCut systems).
You can use it for cardstock, felt, fabric, shrink wrap.
Made from 100% steel
We've collected lots of great ideas for this punch on Pinterest and in our creative collection .Take a look and get inspired.
Published on: 15. July 2022
%
Stempelset - Moderne Jubiläumszahlen II
€17.00*
€21.95*
(22.55% saved)
Das “Moderne Jubiläumszahlen II" Photopolymer Stempelset besteht aus 27 Stempeln auf einem großen A5 Sheet. Damit die Stempel auch richtig benutzt werden können, benötigt Ihr Acrylblöcke die nicht mit in dem Angebot enthalten sind. Weitere Inspirationen mit diesem Stempelset sammeln wir auf unserer Pinterest Pinnwand und in unserer Kreativ-Sammlung. Schaut doch mal vorbei und lasst euch inspirieren. Das Stempelset beinhaltet folgende Stempel: zehnten: ca. 3,38 x 0,52 cm fünfundzwanzigsten: ca. 8,66 x 0,62 cm achtzigsten: ca. 5,10 x 0,53 cm zwanzigsten: ca. 5,23 x 0,54 cm dreißigsten: ca. 4,57 x 0,54 cm siebzigsten: ca. 4,52 x 0,54 cm vierzigsten: ca. 4,69 x 0,54 cm achtzehnten: ca. 4,87 x 0,54 cm fünfzigsten: ca. 4,93 x 0,62 cm hundertsten: ca. 5,00 x 0,53 cm neunzigsten: ca. 5,03 x 0,54 cm Hochzeitstag: ca. 7,75 x 2,79 cm Glückwunsch: ca. 6,02 x 1,35 cm Alles Liebe: ca. 5,08 x 1,33 cm zum: ca. 2,32 x 1,28 cm Jubiläum: ca. 5,74 x 2,28 cm Jubiläum: ca. 4,99 x 1,32 cm zum: ca. 2,09 x 0,65 cm Geburtstag: ca. 5,10 x 1,43 cm Geburtstag: ca. 6,74 x 2,79 cm Hochzeitstag: ca. 5,87 x 1,72 cm Alles Liebe: ca. 5,63 x 2,38 cm Glückwunsch: ca. 7,83 x 2,36 cm + 4 Herzen in verschiedenen Größen ACHTUNG! Sollten Sie das Wort "sechzigsten" vermissen, so ist es in der Auflistung wirklich nicht aufgeführt. Bei der Zusammenstellung des Stempelsets hat sich die Sechzig gekonnt versteckt und wir haben sie vergessen. In dem Stempelset Moderne Jubiläumszahlen II Teil 2 findet Ihr eine passende Sechzig Es tut uns sehr leid und wir entschuldigen uns von Herzen. Ganz liebe Grüße Iris & Marion
Veröffentlicht am: 21. Februar 2020
%
Die - Altstadt Häuser
€7.50*
€8.95*
(16.2% saved)
Das Stanzen Set "Altstadt Häuser" besteht aus 3 unterschiedlichen Häuser mit Altstadt Flair. Haus 1 ist ca. 6,13 x 1,62 cm Haus 2 ist ca. 4,98 x 1,73 cm Haus 3 ist ca. 3,33 x 1,58 cm Achtung: Diese Stanze ist ein Set aus 4 einzelnen Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. HIER hat Marion auch eine kleine Anleitung geschrieben, wie man die Stege am besten trennt. Seid vorsichtig beim Trennen der Stege, die hüpfen auch gern mal durch die Gegend. Die Stanze funktioniert mit den gängigen "DieCut Systemen". Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Inspirationen findet ihr bei Pinterest und in unserer Kreativsammlung. Neben der "Altstadt Häuser" haben wir noch weitere tolle Saisonstanzen im Shop. Diese findet ihr HIER. Veröffentlicht am: 01. Aug 2020