Skip to main content

Product information "Die - Designline - Langer schlichter Anhänger"

"Die - Designline - Langer schlichter Anhänger"

A beautiful elongated narrow pendant with plenty of space for dear greetings on your gifts.

The set also includes one square and one round hole punch each, and a small rectangle.

The punches have the following sizes:

  • Pendant (approx. 3.5 x 10.5 cm)
  • square hole punch (approx. 2.0 x 4.0 cm)
  • round hole punch (approx. 1.3 cm diameter)
  • small rectangle (approx. 3.0 x 4.0 cm)

The design for these punches comes from dear Sandra Möller of Paper and Passion.

For a better punching result, please separate the punches before use. You will find the link to a tutorial one paragraph below.

Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies.  HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too.

The punch works with all common die cutting and embossing machines (DieCut systems).

You can use it for cardboard, felt, fabric, shrink wrap.

Material: 100 % steel
Made in USA

On Pinterest and in our creative collection we have collected many great ideas for this punch.
Take a look and get inspired.

Published on: 27. May 2022

Ähnliche Artikel

Stamp set - Designline - Blütenblattzart
The "Designline - Blütenblattzart" photopolymer stamp setconsists of 12 stamps on a large A5 sheet.Beautiful delicate flowers, leaves and twigsinvite you to color. Stamped on a card or a pendant they make your projects something special.The individual stamps in this set have the following sizesflower with straight stem (approx. 3.9 x 12.8 cm)large flower top center (approx. 6.5 x 5.3 cm)flower with curved stem (ca. 5,1 x 10,3 cm)smaller flower (ca. 4,6 x 4,6 cm)large flower bottom right (ca. 6,7 x 6,1 cm)orchid (ca. 4,7 x 8,6 cm)leaf (ca. 2,5 x 4,7 cm)Eucalyptus (approx. 2,4 x 10,1 cm)Für Dich (ca. 3,5 x 1,4 cm)Alles Liebe (ca. 4,1 x 1,3 cm)Vermisse Dich (ca. 5,1 x 1,3 cm)Glückwunsch (ca. 4,9 x 1,4 cm)The beautiful stamps are illustrated by dear Andrea Moritz aka Frau Blütenstempel.The best results are achieved with the VersaFine Clair stamp pads.So that the stamps can be used you need acrylic blocks, which are not included in this offer.We've gathered lots of ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.Published on: May 20, 2022

€21.95*
Die - Sommerblume Distel - Nur noch so lange der Vorrat reicht
Die Distel kommt im Garten und auf den Wiesen ganz picksig daher, aber wenn man genauer hinschaut, entdeckt man eine ganz aussergewöhnliche und wunderschöne Blüte. Wir haben uns davon inspirieren lassen und haben eine Stanze mit ihrem Charme kreiert. Diese Schönheit möchte verbastelt werden. Die ausgestanze Blume ist ca. 8,5 cm lang und die Blüte ist ca. 4,4cm  breit Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 24. Juni 2020

€10.95*
Stamp set - Designline - Bordüren Geburtstag
The "Design line - Bordüren Geburtstag" photopolymer stamp setconsists of 7 stamps on a large A5 sheet.The great borders can be stamped quite discreetly in the backgroundand can then be complemented with an eye-catcher very well.The narrow borders can be used very well withStazOn pigment on water slider foil stampand transferred to candles.The stamps have the following sizes:Border Happy Birthday: approx. 13.3 x 2.1 cmBorder with paper airplane: ca 12,8 x 2,0 cmBorder with hearts: ca. 13,6 x 2,4 cmBorder congratulations: about 12.3 x 0.5 cmBorder ALL THE LOVE FOR YOU♥: approx. 13.5 x 1.8 cmBorder Grunge Style: approx. 13.5 x 2.5 cmBorder with doodle lines: approx. 13.0 x 1.9 cmThe illustrations for this set were drawn for us by Carola from Carolas Bastelstübchen.To use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.In addition to the stamp set - design line - Bordüren Geburtstag, we have other, designed by artists, sets. You can find them under the heading "design line".Published on: February 18, 2022

€21.95*

Our recommendation for you

Die - Eleganter Anhänger - Nur noch so lange der Vorrat reicht
Ein Set aus eleganten Anhängerstanzen. Das Besondere an den Stanzen ist, dass die Seiten leicht gebogen sind und man einen ganz tollen Look zaubern kann. Lasst eurer Fantasie freien Lauf und gestaltet einzigartige Anhänger zum Fest der Liebe (und allen anderen Anlässen). Ihr bekommt 3 Stanzen in unterschiedlichen Größen: Die große Anhänger Stanze ist ca. 10 cm lang und ca. 6,8 cm breit. Die mittlere Anhänger Stanze ist ca. 6,0 cm  und ca. 4,0 cm breit. Die kleinen Anhänger Stanze ist ca. 3,5 cm  und ca. 2,4 cm breit. In Kürze finden sich hier auch Beispiele von unserem Designteam. In unserer Kreativsammlung und auf Pinterest haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Für ein besseres Stanzergebnis die beiden Stanzen von dem Gebrauch trennen. Den Link zu einer Anleitung dazu findet Ihr einen Absatz weiter unten. Achtung: Diese Stanze ist ein Set aus 3 einzelnen Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. HIER hat Marion auch eine kleine Anleitung geschrieben, wie man die Stege am besten trennt. Seid vorsichtig beim Trennen der Stege, die hüpfen auch gern mal durch die Gegend. Die Stanze funktioniert mit den gängigen Stanz-und Prägemaschine (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 23. Oktober 2020

€15.95*
Die - Designline - Breiter schlichter Anhänger
"Die - Designline - Breiter schlichter Anhänger" A beautiful wide plain pendant with plenty of space for dear greetings on your gifts. In the set are still one square and one round hole punch and one rectangle. The punches have the following sizes: Pendant (approx. 5.0 x 9.0 cm) square hole punch (approx. 2.5 x 5.0 cm) round hole punch (approx. 1.3 cm diameter) Rectangle (approx. 4.0 x 4.5 cm) The design for these punches comes from dear Sandra Möller of Paper and Passion. Unfortunately, a wrong inlay was added to the punch during production.For a better punching result, please separate the punches before use. You will find the link to a tutorial one paragraph below. Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies.  HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common die cutting and embossing machines (DieCut systems). You can use it for cardstock, felt, fabric, shrink wrap. Made from 100% steel We've collected lots of great ideas for this punch on Pinterest and in our creative collection .Take a look and get inspired. Published on: 15. July 2022

€14.95*
Die - Designline -Kleine Tags
Die - Designline -Kleine TagsA cool punch set with 12 differenttags. There is for every occasion the righttag for the gift.The punches have the following sizes  1. Tag (approx. 4.1 x 1.5  cm) 2. Tag (approx. 5.4 x 1.0 cm) 3. Tag (approx. 4.5 x 1.0 cm) 4. Day (approx. 4.8 x 1.5 cm) 5. Day (approx. 3.7 x 0.7 cm) 6. Day (approx. 6.0 x 1.5 cm) 7. Day (approx. 3.0 x 1.5 cm) 8. Day (approx. 6.5 x 1.5 cm) 9. Day (approx. 2.9 x 1.5 cm) 10. Day (approx. 6.5 x 1.5 cm) 11. Day (approx. 3.0 x 1.0 cm) 12. Day (approx. 6.5 x 1.5 cm) The idea for this punch set comes from dear Andrea aka Frau Blütenstempel.The punch works with standard punching and embossing machines (DieCut systems).You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired. Published on: 02 December 2022

€14.95*
Die - Designline - Hülle schmale Tags
Die - Designline - Hülle schmale Tags A great punch set to create beautiful envelopes for the long plain tag . So you can easily hide and give away small surprises quite . The punches and finished envelopes have the following sizes Envelope 1 (approx. 8.1 x 8.6 cm) (approx. 3.7 x 8.0 cm) Envelope 2 (approx. 8.0 x 8.0 cm) (approx. 3.7 x 8.0 cm) Envelope 3 (approx. 8.1 x 7.0 cm) (approx. 3.8 x 7.0 cm) The design for these punches comes from dear Sandra Möller of Paper and Passion. The punch works with the common punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink wrap. Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired. Published on: 28. October 2022

€19.95*
Die - Designline - Hülle breite Tags
Die - Designline - Hülle breite TagsA great punch set to create beautiful envelopes for the wide tags . So you can easily hide and give away small surprises quite . The punches and finished envelopes have the following sizes Envelope 1 (approx. 12.0 x 7.0 cm) (approx. 5.2 x 7.0 cm) Envelope 2 (approx. 12,0 x 6,0 cm) (approx. 5,3 x 6,0 cm) Envelope 3 (approx. 12.0 x 8.0 cm) (approx. 5.3 x 7.0 cm) The design for these punches comes from the dear Sandra Möller of Paper and Passion.The punch works with standard punching and embossing machines (DieCut systems).You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired. Published on: 28. October 2022

€19.95*