Stamp set - Designline - Adventszahlen für Label Stempel

€21.95*

Prices incl. VAT plus shipping costs

Available, delivery time: 14 days

Product number: CD-St-896

Weight: 0.063 kg

Stamp set - Designline - Adventszahlen für Label Stempel. Details can be found below.

HERE you will find our Angel Policy.

Product information "Stamp set - Designline - Adventszahlen für Label Stempel"

The "Designline - Adventszahlen für Label Stempel" photopolymer stamp set consists of 91 stamps on a large A5 sheet.

A huge selection of numbers in different fonts for the label stamps you will find in this set. The numbers are perfect for your advent calendars, but also for cards for birthdays and wedding anniversaries.

The stamps in this set have the following sizes

Large numbers in brushstroke look have a height of about 1.7 cm
Small numbers in brushstroke look have a height of about 1.2 cm
Large numbers have a height of about 1.2 cm
Small numbers have a height of approx. 1.0 cm
The written out numbers in thick font and the numbers in thin font have the following sizes

One (approx. 0.9 x 0.4 cm) (approx. 0.9 x 0.8 cm)
Two (approx. 1.0 x 0.4 cm) (approx. 1.1 x 0.8 cm)
Three (approx. 0.9 x 0.4 cm) (approx. 0.9 x 0.8 cm)
Four (approx. 0.9 x 0.4 cm) (approx. 0.9 x 0.8 cm)
Five (approx. 0.9 x 0.5 cm) (approx. 0.9 x 0.9 cm)
Six (approx. 1.2 x 0.4 cm) (approx. 1.2 x 0.8 cm)
Seven (approx. 1.4 x 0.4 cm) (approx. 1.4 x 0.8 cm)
Eight (approx. 1.0 x 0.4 cm) (approx. 0.9 x 0.8 cm)
Nine (approx. 1.0 x 0.4 cm) (approx. 1.0 x 0.8 cm)
Ten (approx. 1.0 x 0.4 cm) (approx. 0.9 x 0.8 cm)
Eleven (approx. 0.6 x 0.4 cm) (approx. 0.5 x 0.8 cm)
Twelve (approx. 1.3 x 0.5 cm) (approx. 1.2 x 0.9 cm)
Thirteen (approx. 1.9 x 0.4 cm) (approx. 1.8 x 0.8 cm)
Fourteen (approx. 1.9 x 0.4 cm) (approx. 1.9 x 0.8 cm)
Fifteen (approx. 1.9 x 0.4 cm) (approx. 1.9 x 0.8 cm)
Sixteen (approx. 1.9 x 0.4 cm) (approx. 1.9 x 0.8 cm)
Seventeen (approx. 1.9 x 0.4 cm) (approx. 1.8 x 0.8 cm)
Eighteen (approx. 2.0 x 0.4 cm) (approx. 1.9 x 0.8 cm)
Nineteen (approx. 2.0 x 0.4 cm) (approx. 1.9 x 0.8 cm)
Twenty (approx. 1.9 x 0.4 cm) (approx. 1.8 x 0.8 cm)
Twenty-one (approx. 3.3 x 0.4 cm) (approx. 3.2 x 0.8 cm)
Twenty-two (approx. 3.7 x 0.4 cm) (approx. 3.6 x 0.8 cm)
Twenty-three (approx. 3.6 x 0.4 cm) (approx. 3.4 x 0.8 cm)
Twenty-four (approx. 3.6 x 0.4 cm) (approx. 3.4 x 0.8 cm)
small star (ca. 0,5 x 0,5 cm)
medium star (ca. 0,9 x 0,9 cm)
large star (approx. 1.5 x 1.5 cm)
The illustrations for this set were drawn for us by Carola from Carolas Bastelstübchen.

To use the stamps, you need acrylic blocks, which are not included in this offer.

We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.

In addition to the stamp set - Designline - Advent Numbers for Label Stamps, we have other sets designed by artists. You can find them under the heading "Designline".

Published on: September 23, 2022

Ähnliche Artikel

Die - Designline - Breiter Anhänger mit Stern

"Die - Designline - Breiter Anhänger mit Stern" A beautiful wide rectangular pendant with a small star in the lower right corner, make your gifts special. Also in the set are one square and one round hole punch each. The punches have the following sizes: Width pendant (approx. 5.0 x 8.9 cm) square hole punch (approx. 2.4 x 5.9 cm) round hole punch (approx. 1.3 cm in diameter) The design for these punches comes from dear Sandra Möller of Papier und Passion. For a better punching result please separate the punches before use. You will find the link to a tutorial one paragraph below. Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies. HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink wrap. Material: 100 % steelMade in USA We've collected lots of great ideas for this punch on Pinterest and in our creative collection .Take a look and get inspired.Published on: 17. June 2022

€14.95*

Stamp set - Designline - Label Stempel

The "Designline - Label Stampel" photopolymer stamp setconsists of 17 stamps on a large A5 sheet.A large selection of different label and backgroundbackground stamps you will find in this set:They are perfect for small labels on glassesand bowls on the buffet for the next party.In this stamp set you will find the following stamps:Left row from top to bottom1st label (diameter approx. 3,6 cm)2nd label (approx. 5,3 x 1,8 cm)3rd label (approx. 5.4 x 1.8 cm)4th label (approx. 5.3 x 1.8 cm)5th label (approx. 4.8 x 1.8 cm)6th label (approx. 4.8 x 1.8 cm)7th label (approx. 8.0 x 2.4 cm)Middle row from top to bottom1st label (approx. 4.4 x 3.2 cm)2nd label (approx. 5.5 x 1.3 cm)3rd label (approx. 5.5 x 1.3 cm)small dot (diameter approx. 0.3 cm)large dot (diameter approx. 0.4 cm)Right row from top to bottom1st label (approx. 4.0 x 2.9 cm)2nd label (approx. 5.3 x 2.9 cm)3rd label (approx. 5.3 x 2.9 cm)4th label (approx. 5.3 x 2.9 cm)5th label (diameter approx. 4.5 cm)The illustrations for this set were drawn for us by Carola from Carolas Bastelstübchen.To use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.In addition to the stamp set - Designline - Label Stampel, we have other sets designed by artists. You can find them under the heading "Designline".Published on: 02 September 2022

€21.95*

Die - Designline - Langer schlichter Anhänger

"Die - Designline - Langer schlichter Anhänger" A beautiful elongated narrow pendant with plenty of space for dear greetings on your gifts. The set also includes one square and one round hole punch each, and a small rectangle. The punches have the following sizes: Pendant (approx. 3.5 x 10.5 cm) square hole punch (approx. 2.0 x 4.0 cm) round hole punch (approx. 1.3 cm diameter) small rectangle (approx. 3.0 x 4.0 cm) The design for these punches comes from dear Sandra Möller of Paper and Passion. For a better punching result, please separate the punches before use. You will find the link to a tutorial one paragraph below. Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies. HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink wrap. Material: 100 % steelMade in USA On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired. Published on: 27. May 2022

€12.95*

Our recommendation for you

Die - Waldbewohner - Familie Hirsch

Die - Waldbewohner - Familie HirschA beautiful "family deerthey fit wonderfully on cardsor winter layouts. The punches have the following sizesdeer (approx. 4,8 x 8,4 cm)Roe deer (approx. 4,6 x 5,4 cm)Fawn (approx. 3,4 x 5,0 cm)The punch works with all standard die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steelWe have collected lots of great ideas for this punch on Pinterest and in our creative collection. Have a look and get inspired.Published on: 13 October 2023

€14.95*

Die - Designline - Label Set

Die - Designline - Label SetBanners, tags and flags areoften the icing on the cake on cards or on packaging.In this set you will find 12 differentlabel punches, there is definitely something for everyone.The punches have the following sizesLeft side from top to bottom:1. label (approx. 4.5 x 1.0 cm)2. label (approx. 3.2 x 3.8 cm)3. label (approx. 2.4 x 4.8 cm)4. Label (approx. 2.3 x 4.0 cm)Right side from top to bottom:1. label (approx. 4.3 x 1.2 cm)2. label (approx. 5.3 x 1.0 cm)3. label (approx. 5.4 x 1.5 cm)4. label (approx. 5.5 x 1.6 cm)5. label (approx. 6.5 x 1.5 cm)6. label (approx. 6.5 x 1.4 cm)7. label (approx. 6.5 x 1.4 cm)8. label (approx. 6.6 x 1.5 cm)The idea for this die-cutting set comes from the lovely Andrea Moritz aka Frau Blütenstempel. The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected lots of great ideas for this punch. Take a look and let yourself be inspired. Published on: 23. February 2024

€15.95*

Die - Layer Anhänger - Winterwald

Die - Layer Anhänger - WinterwaldWith this 4-piece die set you can create beautifulyou can create beautiful pendants in several layers. If you put all four punched parts on top of each otheryou have a magical winter forest landscape.The punches have a size of approx. 8.0 x 8.9 cm.The punch works with all standard die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steelWe have collected lots of great ideas for this punch on Pinterest and in our creative collection. Have a look and get inspired.Published on: 17 November 2023

€21.95*

Basic - Aufleger mit geprägtem Rahmen - Quadrat

Basic - Aufleger mit geprägtem Rahmen - QuadratThree beautiful card attachments with an embossed frame, turn your projects into something very special. The punches have the following sizes large overlay (approx. 14.0 x 14.0 cm) medium overlay (approx. 10.0 x 10.0 cm) small overlay (approx. 7.0 x 7.0 cm) The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 02 August 2024

€21.95*

Die - Deko Weihnachtskugeln - Zapfen

Die - Deko Weihnachtskugeln - ZapfenBeautiful Christmas baubles in the shape of cones for your Christmas decoration.They also look wonderful on long cards or taller packaging. The punches have the following sizesCones (approx. 6.0 x 13.1 cm)Cones (approx. 6,0 x 11,2 cm)Cones (approx. 5,8 x 12,7 cm)The punch works with all standard die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steelWe have collected lots of great ideas for this punch on Pinterest and in our creative collection. Have a look and get inspired.Published on: 20 October 2023

€23.95*