Skip to main content

Product information "Stamp set - Designline - Stempel für breite Anhänger"

The "Designline - Stempel für breite Anhänger" photopolymer stamp set
consists of 14 stamps on a large A6 sheet.

Great stamps for our wide pendant punches.
You can use it to design the pendants with dear
words and greetings.

You can find the matching dies HERE.

The stamps in this set have the following sizes

Heart (approx. 2,4 x 1,8 cm)
Circle (diameter approx. 2,9 cm)
brush stroke (approx. 4,0 x 1,9 cm)
2x 15 stars (each approx. 3.6 x 2.5 cm)
aus meiner Küche: (ca. 3,8 x 1,6 cm)
für (ca. 2,1 x 0,8 cm)
von (ca. 2,2 x 0,6 cm)
6 lines have a length of about 4,0 cm
The illustrations for this set were drawn for us by Sandra Möller from Papier und Passion.

To use the stamps you need acrylic blocks, which are not included in this offer.

We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.

In addition to the stamp set - Designline - Stempel für breite Anhänger, we have other sets designed by artists. You can find them under the heading "Designline".

Published on: December 16, 2022

Ähnliche Artikel

Die - Designline - Breiter Anhänger mit Stern
"Die - Designline - Breiter Anhänger mit Stern" A beautiful wide rectangular pendant with a small star in the lower right corner, make your gifts special. Also in the set are one square and one round hole punch each. The punches have the following sizes: Width pendant (approx. 5.0 x 8.9 cm) square hole punch (approx. 2.4 x 5.9 cm) round hole punch (approx. 1.3 cm in diameter) The design for these punches comes from dear Sandra Möller of Papier und Passion. For a better punching result please separate the punches before use. You will find the link to a tutorial one paragraph below. Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies.  HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink wrap. Material: 100 % steelMade in USA We've collected lots of great ideas for this punch on Pinterest and in our creative collection .Take a look and get inspired.Published on: 17. June 2022

€14.95*
Die - Designline - Breiter schlichter Anhänger
"Die - Designline - Breiter schlichter Anhänger" A beautiful wide plain pendant with plenty of space for dear greetings on your gifts. In the set are still one square and one round hole punch and one rectangle. The punches have the following sizes: Pendant (approx. 5.0 x 9.0 cm) square hole punch (approx. 2.5 x 5.0 cm) round hole punch (approx. 1.3 cm diameter) Rectangle (approx. 4.0 x 4.5 cm) The design for these punches comes from dear Sandra Möller of Paper and Passion. Unfortunately, a wrong inlay was added to the punch during production.For a better punching result, please separate the punches before use. You will find the link to a tutorial one paragraph below. Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies.  HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common die cutting and embossing machines (DieCut systems). You can use it for cardstock, felt, fabric, shrink wrap. Made from 100% steel We've collected lots of great ideas for this punch on Pinterest and in our creative collection .Take a look and get inspired. Published on: 15. July 2022

€14.95*
Die - Herzanhänger - Nur noch so lange der Vorrat reicht
Ein zweiteiliges Anhänger Set, mit einem Abschluss in Herzform. Damit lassen sich besondere Geschenke wunderbar verzieren. Dies ist ein Set aus 2 Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. Anhänger groß: ist ca. 7,7 x 4,2 cm Anhänger mini: ist ca. 2,7 x 1,5 cm Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen „DieCut Systemen“. Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Das Set "Herzanhänger Stempel" passt perfekt zur Stanze "Herzanhänger". Dieses findet ihr HIER. Veröffentlicht am: 12. Apr 2017

€11.95*
Die - Designline - Breiter Anhänger mit Herz
"Die - Designline - Breiter Anhänger mit Herz" A beautiful wide rectangular pendant with a small heart in the lower right corner, make your gifts special. Also in the set are one square and one round hole punch each. The punches have the following sizes: Width pendant (approx. 5.0 x 8.9 cm) square hole punch (approx. 2.4 x 5.9 cm) round hole punch (approx. 1.3 cm in diameter) The design for these punches comes from dear Sandra Möller of Paper and Passion. For a better punching result, please separate the punches before use. You will find the link to a tutorial one paragraph below. Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies.  HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink wrap. Material: 100 % steelMade in USA We've collected lots of great ideas for this punch on Pinterest and in our creative collection .Take a look and get inspired. Published on: July 08, 2022

€14.95*
Acrylic block - rectangular - 16,0 x 6,0 cm
Acrylic block - rectangular - 16.0 x 6.0 cmThe rectangular acrylic block has a size of 16.0 x 6.0 cm and a thickness of 2.0 cm.The block has circumferential finger grooves (recessed grips) for easy handling.The printed grid makes it easy to place the stamps straight, to place the stamps straight.Our stamps adhere easily to this block and are just as easy toand can be removed and stored just as easily.Published on: 24 March 2023

€12.00*
Acrylic block - round - 7 cm
Acrylic block - round - 7 cmThe round acrylic block has a diameter of 7 cm and a thickness of 2.0 cm.The block has circumferential finger grooves (recessed grips) for easy handling.The printed grid makes it easier for you to place the stamps straight, to place the stamps straight.Our stamps adhere easily to this block and are just as easy toand can be removed and stored just as easily.Published on: 24 March 2023

€8.00*
Acrylic block - rectangular - 3.0 x 3.5 cm
Acrylic block - rectangular - 3.0 x 3.5 cmThe rectangular acrylic block has a size of 3.0 x 3.5 cm and a thickness of 2.0 cm.The block has circumferential finger grooves (recessed grips) for easy handling.The printed grid makes it easier for you to place the stamps straight, to place the stamps straight.Our stamps adhere easily to this block and are just as easy toand can be removed and stored just as easily.Published on: 24 March 2023

€5.00*